Synectix EZ VMS Lite User Manual page 22

The Default password for the Admin is 999. To change this password, enter a new
Password (of 2, 3 or 4 digits). Special characters, like, *, # are not allowed. After entering
the new password, re-enter the new password for confirmation. If you fail to confirm the
new password three times successively, EZ VMS Lite will take you directly to main
greeting and your password remains unchanged.
1.3.6 Voice Settings
After you press 6 for 'Voice Settings', EZ VMS Lite prompts you with the following
options:

Press 1 for Volume Control. (1.3.6.1)

Press 2 for AGC Control. (1.3.6.2)
1.3.6.1 Volume Control
The EZ VMS Lite has the facility to adjust the output volume level digitally for all the
messages being played back. This level control is common for all the ports and cannot be
set differently for each port.
When you press 1, the EZ VMS Lite announces the current value for the Volume Control.
Enter the new value in two-digit format in the range from 08 to 19. Default value is 12.
1.3.6.2 AGC Control
Automatic Gain Control (AGC) is required to be used when the volume level of the
incoming calls varies widely for the different types of incoming calls e.g. local, long
distance or international calls. When AGC is enabled, the recording level of the incoming
messages is automatically adjusted so that when they are played back they sound
uniformly loud even though they were received at different volume levels.
The current status of Automatic Gain Control (AGC) value is announced and then you
may press 1 to enable AGC or press 2 to disable AGC.
1.3.7 Day Light Savings Time Settings
The DST settings are pre-programmed to the dates and times for the US and North
American requirements and is enabled by default. However, the DST may be disabled if
required.
The current status of DST is announced and then you may press 1 to enable or press 2 to
disable DST.
1.3.8 PMS port Baud rate settings
The Baud rate and other settings for the PMS port may be set by using this hidden option
which is not promoted.
The system prompts the current value as a 3 digit number and asks you to enter the new
3 digit value. Program the desired settings as follows :
EZ VMS Lite
21