Sega MINI DELUXE THE HOUSE OF THE DEAD 4 Service Manual page 16

b. OUTPUT TEST
Select OUTPUT TEST to display the following screen and check the status of output devices.
This test should be used periodically to check that the lamps are functioning correctly.
Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to enter the
selected item's test.
•
Display of GUN MOTOR1 and GUN MOTOR2 options can be turned on or off
using the DIP-SW. For cabinets with vibration motors attached to the Control
Units (Guns), turn on display of the GUN MOTOR1 and GUN MOTOR2 under
DIP-SW settings to alter these settings.
START1 LAMP
START2 LAMP
GUN MOTOR1
GUN MOTOR2
－＞
EXIT
SELECT WITH SERVICE AND PRESS TEST
Perform the tests as follows.
● START1 LAMP:
● START2 LAMP:
● GUN MOTOR1:
● GUN MOTOR2:
Move the cursor to EXIT and press the TEST Button to return to the Game Test Mode screen.
14
OUTPUT TEST
OFF
OFF
OFF
OFF
Select START1 LAMP and press the TEST Button to turn the option
ON. The player 1 START Button will light up. The lamp will remain on
for as long as the TEST Button is held down.
Select START2LAMP and press the TEST Button to turn the option ON.
The player 2 START Button will light up. The lamp will remain on for as
long as the TEST Button is held down.
Select GUN MOTOR1 and press the TEST Button to turn the option
ON. The player 1 gun will begin to vibrate. The vibration will continue
for as long as the TEST Button is held down.
Select GUN MOTOR2 and press the TEST Button to turn the option
ON. The player 2 gun will begin to vibrate. The vibration will continue
for as long as the TEST Button is held down.