Sega MINI DELUXE THE HOUSE OF THE DEAD 4 Service Manual page 57

e-2 PLAYER1 GUN SPEED ADJUSTMENT/ PLAYER2 GUN SPEED ADJUSTMENT
•
Pay attention to your surroundings when moving the Control Unit (Gun) during
speed adjustment so as not to hit people or objects around you. You may hurt
others or yourself if due caution is not taken.
•
If GUN SPEED SETTINGS are not set, or a mistake is made with the GUN
SPEED SETTINGS, the gun may start to only fire single shots during the game.
•
This is because the gun continually registers as having been shaken and thus
continually reloads. This is not a fault with the gun itself, and can be fixed by
performing GUN SPEED SETTINGS again.
Adjusts the registered speed for when the Player 1 gun is shaken. (This is the same for "PLAYER2 GUN
SPEED ADJUSTMENT".)
Select PLAYER1 GUN SPEED ADJUSTMENT on the Gun Speed Setting screen and press the TEST
Button to display the following screen.
NOTE: "PLEASE SHAKE THE PLAYER1 GUN" on the screen will flash.
PLAYER1 GUN SPEED ADJUSTMENT
PLEASE SHAKE THE PLAYER1 GUN
GUN SPEED X
GUN SPEED Y
PRESS TEST TO CONTINUE
Follow the onscreen instructions to perform the gun speed settings.
Shake the gun on the X axis and the Y axis and set the MAX value for each.
NOTES:
- You need only shake the gun gently on the X axis and the Y axis. If these settings are set with the gun
shaken very hard it may lead to malfunctions during the game.
- Proceed to the next screen to confirm the set values. The bar here is simply for reference, and swinging
the gun forcefully and filling this bar to the top is not necessary. Moving the gun lightly so that the bar is
more than half full will allow the game to progress smoothly.
NOW 7f
MAX 7f
NOW 7f
MAX 7f
55