Securing In Place (Leg Adjuster Adjustment) - Sega Crazy Taxi High Roller Installation & Service Manual

3.7.2. SECURING IN PLACE (LEG ADJUSTER ADJUSTMENT)

· Make sure all of the leg adjusters are in contact with the floor. If they are not the
machine may move and cause injury. This operation requires 2 people.
· Only QUALIFIED SERVICE PERSONNEL should carry out this operation.
This machine has four castors and two leg adjusters on the main cabinet, and a further two level adjusters
on the rear of the floor. When the installation position is decided, unscrew the leg adjusters so that they
raise both front castors 7mm from the floor. Make sure the machine is level.
1. Move the product into the installed position.
2. Unscrew the adjusters until they are in contact
the floor, and use a wrench to turn them further
until the front castors are raised approximately
7mm above the floor.
3. Tighten the locknut on the leg adjusters upwards
to lock the legs in position.
17