Sega MINI DELUXE THE HOUSE OF THE DEAD 4 Service Manual page 19

PLAYER1 GUN ADJUSTMENT
PLAYER1 GUN MARK CHECKING
＋OUT OF SCREEN P1＋
TEST
SERVICE : TO CANCEL
Point the Control Unit (Gun) at the screen and a gun mark will be displayed. Check to make sure that the
gun can aim right up to the edges of the frame.
If the calibration is correct press the TEST Button to save it.
If re-calibration is required press the SERVICE Button. The calibration results will not be saved and you will
return to the Gun Calibration Setting screen.
"OUT OF SCREEN" is displayed when the gun cross is perceived to be out of screen.
Refer to the following procedure when adjusting the sights.
Line up the concave sight nearest you on the gun so that it is at the height of the horizontal line of the "+"
mark.
Line up the convex sight at the tip of the gun so that it also lines up with the horizontal line.
Line up the centers of the tops of the concave and convex sights with the center of the "+" and fire.
Perform the above inspections also at the time of monthly inspection.
: TO MEMORIZE
17