Sega MINI DELUXE THE HOUSE OF THE DEAD 4 Service Manual page 34

c. JVS TEST
The JVS TEST screen displays information on the connected JVS I/O boards.
Select INPUT TEST to display input data for the currently displayed JVS I/O board. (See "d - JVS INPUT
TEST")
Select NEXT NODE to display information on the next NODE.
If no JVS I/O boards are connected, the message "NO JVS NODE" will be displayed.
The following information is displayed on this screen.
● NODE:
connected NODEs
● NAME:
● CMD VER:
● JVS VER:
● COM VER:
● SWITCH:
● COIN:
● ANALOG:
● ROTARY:
● KEYCODE:
● SCREEN:
● CARD:
● HOPPER OUT:
● DRIVER OUT:
● ANALOG OUT:
● CHARACTER:
● BACKUP:
Move the cursor to EXIT and press the TEST Button to return to the System Test Menu screen.
32
The currently displayed NODE number and the total number of
ID Code
Command format version
JVS standard version
Communication version
Number of players and number of 1P switches
Number of coin slots
Number of analog channels
Number of encoders
Keycode input active/inactive
Screen position input (X axis, Y axis, number of channels)
Number of card slots
Number of hoppers
Number of standard output drivers
Number of analog output channels
Number of characters/lines displayed
Backup present/absent