Sega MINI DELUXE THE HOUSE OF THE DEAD 4 Service Manual page 70

Illustration shows VTS PCB.
All COIN ASSIGNMENTS are carried out and processed by the VTS Board. This game uses a single SR3
Coin Validator (if supplied). This Validator will connect into port A as indicated by the illustration above.
All Credit settings are configured via the DIP switches also located on the VTS Board (please refer to later
on in this manual for the appropriate switch settings).
IMPORTANT – The CREDIT SETTINGS as displayed in the COIN ASSIGNEMNTS of the SYSTEM TEST
MODE in the LINDBERGH TEST MENU should always be set to 1 COIN = 1 CREDIT to maintain a correct
output from the VTS.
68