Home Position Adjustment - ACME XP-5000WZ User Manual

Reset Functions
To select Reset Function, press the ENTER button to confirm, use the UP/DOWN button to select
Pan/Tilt, Effect or All.
Pan/Tilt —Reset Pan/Tilt
To select Pan/Tilt, press the ENTER button to confirm, use the UP/DOWN button to select Yes
(the unit will run built-in program to reset pan and tilt to their home positions) or No, press the
ENTER button to store. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Effect
To select Effect, press the ENTER button to confirm, use the UP/DOWN button to select Yes (the
unit will run built-in program to reset shutter to their home positions) or No, and press the ENTER
button to store. Press the MENU button to exit.
All — Reset All
To select All, press the ENTER button to confirm, use the UP/DOWN button to select Yes (the unit
will run built-in program to reset all motors to their home positions) or No, press ENTER button to
store. Press the MENU button to exit.
Special Functions
To select Special Functions, press the ENTER button to confirm, and select Factory Settings.
Factory Settings
To Select Factory Setting, Use the UP/DOWN button to select Yes (the fixture will reset to factory
settings) or No(Normal), press the ENTER button to confirm. Press the MENU button back to the
last menu or exit menu mode idling one minute.

5.2 Home Position Adjustment

Press the MENU button into menu mode, then press and hold the ENTER button for about 3 seconds
into offset mode to adjust the home position. Select the function by the ENTER button. Use the
UP/DOWN button to select the submenu, press the ENTER button to store and automatically return to
A
16C