Table of Contents
Advertisement
3. HOW TO SET UP THE EQUIPMENT
3.3
Connection Examples of Various Systems
3.3.1
Connection of Mechanical Remote Control System
The single station of single engine
*1
*2 SDS CONNECTOR (DF40A-)
*1: Connect only the system with the trim sender.
*2: It is required to change the SDS connector to one for engine.
Remove the SDS connector cap to connet to the male gauge
connector, and connect the SDS connector to the female gauge connector.
*3: With CONNECTOR COMP, BRANCH : Q'ty. 1
3-10
SDS
SDS
*3
Advertisement
Table of Contents
