Table of Contents
Advertisement
3.9
Wireless LAN Setting
3.9.1
How to join an existing wireless network
By connecting to an existing network, you may download software updates and
weather information from the internet.
1. Tap the Home icon to show the home screen and display mode settings.
2. Tap [Settings], then [General].
3. Tap [Wireless LAN Settings].
4. Tap [Wireless Mode].
5. Tap [Connect to existing LAN], then tap the [<] icon at the top left of the
display.
6. Tap [Wireless] in the [ENABLE WIRELESS] menu.
7. Tap [Scan] to scan the vicinity for accessible WLAN networks. Available networks
are listed. To delete all WLAN networks, select [Forget All Available Networks].
8. Tap the appropriate WLAN network to show the following display.
9. Tap [Connect], and the following display appears.
10. Use the software keyboard to enter the network key, then tap the [OK] button. To
see what you have input, check [Show characters].
Note: If the network key is incorrect, an error message appears. Enter the correct
key and tap [OK] again.
11. Tap [X] on the title bar to close the menu.
AP1
CANCEL
FORGET
CONNECT
ENTER WIRELESS NETWORK KEY
Show characters
CANCEL
3. HOW TO SET UP THE EQUIPMENT
3-33
Advertisement
Table of Contents
