Suzuki SMD12 Installation Manual page 60

3. HOW TO SET UP THE EQUIPMENT
[Initial Setup] menu - [BROWSER INSTALLATION]
Menu item
[FAX30 Browser]
[FA30 Browser]
[FA50 Browser]
[Initial Setup] menu (Other menu items)
Menu item
[Chart Master Device]
[System ID]
[IP Address]
[Quick Self Test]
[Certification Mark]
[ServiceMan]
[Update Network
Equipments]
[Event Input Configu-
ration]
[Remote Controller
Configuration]
[Sirius Radio Diag-
nostic]
[Sirius Weather Diag-
nostic]
[Reset Default Set-
tings]
[Initial Setup] menu - [GRAPHIC INSTRUMENTS SETUP]
Menu Item
Maximum Boat Speed
Maximum Wind Speed
Menu Item
Minimum Depth
Maximum Depth
[GRAPHIC INSTRUMENTS SETUP] - [SEA SURFACE TEMPERATURE]
Menu Item
Minimum Sea Surface
Temperature
Maximum Sea Surface
Temperature
3-22
Description
Show the Facsimile Receiver FAX-30 display.
Show the AIS Receiver FA-30 display.
Show the AIS Receiver FA-50 display.
Description
Set to [ON] to use this unit as the master, [OFF] to use this unit as a slave.
The system ID for this device within the network.
IP address for this unit within the network.
Displays various details regarding the Multi-Function Display, radar and fish
finder.
Displays relevant certification for this equipment.
Requires login password. For the service technician.
For the service technician.
Set the function for the event switch.
When there are multiple units in the SMD network, the Remote Controller
FURUNO MCU-004/MCU-005 can select the display to show on the unit
with FURUNO MCU-004/MCU-005 connection. Further, the cycling order of
displays can be set. See the Operator's Manual.
Check the satellite radio of the FURUNO BBWX3 Sirius/XM Satellite
Weather Receiver for proper operation. See the Operator's Manual
Check the weather section of the FURUNO BBWX3 Sirius/XM Satellite
Weather Receiver for proper operation. See the Operator's Manual.
Reset the system to default settings.
Description
Set the transducer's maximum detectable
speed.
Set the transducer's maximum detectable
speed.
[GRAPHIC INSTRUMENTS SETUP] - [DEPTH]
Description
Set the transducer's minimum detectable
depth.
Set the transducer's maximum detectable
depth.
Description
Set the transducer's minimum detectable
temperature.
Set the transducer's maximum detectable
temperature.
Option (setting range)
Option (setting range)
[OFF], [Event], [MOB]
[OK], [Cancel]
Options (setting range)
1 (kn) to 99 (kn)
1 (kn) to 99 (kn)
Options (setting range)
1 (m) to 1999 (m)
1 (m) to 2000 (m)
Options (setting range)
0.00°C to 98.99°C
0.01°C to 99.99°C