Retrofit Kit For Smd12 (Option) And Front Fixing Panel Kit For Smd16 (Option) - Suzuki SMD12 Installation Manual

1. MOUNTING
1.2.2 Method B: Pilot holes can be opened.
1. Prepare a cutout at the mounting location using the template. (supplied)
2. Remove the flush mount plate from the Multi-Function Display. The flush mount
plate is not fastened to the Multi-Function Display, and can be easily removed.
3. Fit the flush mount plate to the cutout. Fasten the flush mount plate to the pilot
holes of cutout with flat headed self-tapping screws (3 x 20 SUS XM7). Insert the
Multi-Function Display to the cutout and fasten with hex bolts (supplied).
Flat headed self-tapping screws 3 x 20 SUS XM-7 (Supplied)
Fit the flush mount plate to the
cutout, fasten it to the cutout with
flat headed self-tapping screws and insert
the Multi-Function Display to the cutout.
1.3 Retrofit Kit for SMD12 (option) and Front Fixing
Panel Kit for SMD16 (option)
When upgrading to the SMD12 or front-mounting the SMD16, use the kit which match-
es your old equipment. (Refer to the table below for details.)
Note: Remove the flush mounting sponges attached to the back of the Multi-Function
Display. Take care that there is no sponge left on the back of the Multi-Function Dis-
play.
Optional kit
OP19-15
OP19-16
OP19-17
1-4
Code No.
001-337-430 F Mount Panel A (Code
No.: 100-397-090-10),
520 SUS304, 4 pcs.
(Code No.: 001-336-820)
001-337-440 F Mount Panel B (Code
No.: 100-397-100-10),
520 SUS304, 4 pcs.
(Code No.: 001-336-820)
001-337-450 F Mount Panel 15 (Code
No.: 100-397-600-10),
520 SUS304, 4 pcs.
(Code No.: 001-336-820)
Secure the Multi-Function Display Secure the Multi-Function Display
with the hex bolts. (supplied) with the hex bolts. (supplied)
Contains
For SMD12
For SMD12
Front Fixing Panel Kit
for SMD16
Remarks