Table of Contents
Advertisement
[GRAPHIC INSTRUMENT SETUP] - [PROPULSION ENGINE] or [OTHER ENGINE]
Menu Item
[Max. RPM]
[Red Zone Oil Pressure]
Max. Oil Pressure
Min. Temperature
[Red Zone Temperature]
Menu item
[Total Fuel Capacity]
[Manual Fuel Manage-
ment]
Menu item
[Add Default CZone
Pages]
[CZone DIP Switch
Settings]
Menu item
[Reset Instrument Pag-
es]
[Reset Default Set-
tings]
[Initial Setup] menu - [Engine & Tank Automatic Setup]
The SMD12/SMD16 will automatically detect engines and tanks connected to the
same network.
This is the recommended method for setting up engines and tanks.
Description
Set the maximum rpm of your engine to
show on the RPM display.
Set the starting value for the red zone area
of the oil pressure meter.
Set the maximum oil pressure of your
engine.
Set the minimum temperature for your
engine.
Set the starting value for the red zone area
of the engine temperature indicator.
Manual Fuel Management
Description
Enter the total fuel capacity of your
tank(s).
Set to [ON] for manual fuel manage-
ment. See the Operator's Manual.
CZone
Create, edit C-Zone pages.
Set this unit's DIP switches. For the serviceman. Do not change the set-
tings.
Resets all instrument pages to default.
Resets applicable settings to default.
3. HOW TO SET UP THE EQUIPMENT
Options (setting range)
1 (rpm) to 20,000 (rpm)
0 (psi) to 143 (psi)
1 (psi) to 144 (psi)
0.00°C to 99.00°C
0.01°C to 999.00°C
Options (setting range)
0 to 9,999(L).
[OFF], [ON].
Description
Description
[OK], [Cancel]
[OK], [Cancel]
3-23
Advertisement
Table of Contents
