3. HOW TO SET UP THE EQUIPMENT
Engine No.
1. Tap the Keyboard icon.
2. Input the engine number to following menu.
No.
Menu name
1
Cursor
2
[Cancel] button
3
[OK] button
4
Cursor keys
3. Tap the [APPLY GATEWAY SETTING] to fix the settings (Only DBW model).
Trim Calibration (For Mechanical Model)
1. Tap the [TRIM CALIBRATION].
2. Set the full trim up position of the connected engine.
3. Tap the [OK] on Pop-up menu.
4. Set the full trim down position of the connected engine.
5. Tap the [OK] on Pop-up menu.
3-6
1
Cursor position is highlighted.
Aborts character entry. No changes are applied.
Tap to complete character input and apply changes.
Tap to move the cursor left/right.
APP LY GATEWAY SETTING
2
Description