Setting The Resolution; Resolution - Epson PriorityFax 2000 Owner's Manual

Setting the

Resolution

Press You see the function display:
FUNCTION.
Press 0 to enter the fax back message mode.
Press You see the following display:
SET.
Dial the fax number and press
You can adjust the quality of the documents produced by the
PriorityFax by changing
documents you copy or send. There are three resolution modes:
standard (std), fine, and photo. Standard is for typewritten or
typeset text and line drawings; fine is for newsprint and detailed
drawings; and photo is for photographs. Standard is the factory
setting.
Note Note
The fine and photo modes give more detail, but The fine and photo modes give more detail, but
slower than the standard mode; therefore, use the photo slower than the standard mode; therefore, use the photo
mode only for photographs and the fine mode only when mode only for photographs and the fine mode only when
necessary. necessary.
The copy function (described in Chapter 1) uses only two
resolution modes: fine and photo.
Using the PriorityFax Advanced Features
START.
resolution mode to suit
the
type of
the
are are
they they
4-3