Menu Configuration - Ahlborn ALMEMO 2590-2A Operating Instructions Manual

Locking (see 13.4)
Atmospheric pressure (see 14.6)
Temp. compensation (see 11.2.4)
Setpoint (see 12.3)
Measuring time (see 12.2.3)
Measuring duration (see 12.5.9)
11.6.2
In menu selection select user menu U1
Before configuring please ensure that the device is connected via
a data cable to your PC and start the
ALMEMO®-Control software .
Click once with the mouse on
You then reach
Select the device and press
Choose the desired functions on the left side and
drag-and-drop into the menu window on the right.
For all functions concerning measured values (e.g. maximum, aver-

age value, bar chart) you must in each case enter the measured value
of the measuring point first and then the associated functions.
You are advised to use a meaningful menu title :
Once completed save the menu in the device as U1 :
You can also save all your menus on the PC and reload these as and when
required.
Locking level
Atm pressure
Temp. comp.
Setpoint
Measuring time
Meas. duration

Menu configuration

5
1013 mbar
CT 25.0°C
1100.0 °C
00:00:000.00
00:00:00
Search the network
Device list
Program the user menus
11. Measuring menus
CLR
CLR
CLR
OFF ADJ
CLR
CLR
User menu title
Save menu, U1, OK
o 42
o 43
o 44
o 45
o 46
o 47
35