12. Function menus
be programmed. The total measuring time since starting can be seen in the func-
tion Measuring time.
This is assuming of course that the current time-of-day has been programmed. Sleep
mode takes no account of end time or measuring duration.
To select the menu press key :
Function Measuring duration (format hh:mm:ss): Meas duration :
Start time function (format hh:mm:ss):
End time function (format hh:mm:ss):
Start date function (format dd:mm:yy):
End date function (format dd:mm:yy):
Measuring time since start (format hh:mm:ss.hh): Meas time :
These values can be cleared after selecting the function by pressing :
If the start time for a measuring operation has been programmed,
the following symbol appears in the status bar :
If the end time or the measuring duration for a measuring operation has been
programmed, the following symbol appears in the status bar : ´
52
< ►F >
Start time :
End time :
Start date :
End date :
´
´
´
00:10:00
07:00:00
------
01.05.07
------
00:01:23.45
<OFF>