Indicator Lights - Epson Expression 836XL User Manual

ERROR READY
light light
On On
Flashing Off
Flashing Flashing Fatal error The problem could be:
Off Off
Troubleshooting

Indicator Lights

If an error occurs, the scanner stops operating. The READY
and ERROR lights indicate the type of error.
Error
type Solution
Command The scanner has received incorrect commands from your
error scanning software. Try rescanning the document. If the error still
occurs, try restarting the scanner.
Interface The interface setup is wrong or the scanner is not properly
error connected to the computer. Check the interface connection.
Then push the RESET button or turn the scanner off and on.
The transportation lock screw has not been released.
The optional TPU or the optional ADF is not set up correctly.
The fluorescent lamp may need to be replaced.
The scanner is inoperative.
Check that the transportation lock screw is released, check any
installed options, then push the RESET button. If the scanner
still does not operate properly, turn the scanner off and on. If the
problem persists or it occurs repeatedly, consult your dealer.
Option There's a problem with an installed option. Check the option and
error remove any jammed paper, if necessary.
Page 75