Component Locations - HYOSUNG MX-4000W Operator's Manual

MX-4000W

3.2 Component Locations

Customer Display
The customer display welcomes the consumer and provides instructions for performing transactions at
the terminal.
Function keypads
The function keypads are made up of four keys mounted on each side of the consumer display.
The customer selects from the choices shown on the consumer display and presses the
corresponding function key.
Encryption PIN Pad
During the transaction sequence, the ATM prompts the customer to use the customer keypad to enter
transaction information. The 16-key keypad uses a security module and encrypting PIN pad
technology to secure the information entered by the customer at the keypad.
Cash Dispenser Slot
When the customer requests cash, it is presented through the cash dispenser slot in the fascia.
Receipt Printer Slot
After the customer uses the ATM, the receipt printer prints the transaction information on a form. The
ATM presents the form through the receipt printer slot on the upper fascia.
Card Reader Slot
The consumer inserts (to begin transactions) and removes a card from the card reader slot.
1
2
3
4
5
6
7
8
9
3- 3
3. Hardware Specifications
Liquid Crystal Display
(Customer Display)
Function Keys
Phone Jack (board)
Encryption Pin Pad
Key Lock
Push_End Button
Cash Dispenser Slot
Receipt Printer Slot
Card Reader Slot (Dip Type)