Table of Contents
Advertisement
MX-4000W
5. Operator Function
5.8.3 TERMINAL IP
TERMINAL IP menu contains DHCP EN/DISABLE, IP ADDRESS, SUBNET MASK, GATEWAY and
DNS buttons. If you press DHCP EN/DISABLE button will change DHCP status, ENABLE to DISABLE,
or DISABLE to ENABLE. In case of DHCP is disabled, IP ADDRESS, SUBNET MASK, GATEWAY
and DNS buttons will be displayed.
If DHCP value is ENABLE, ATM uses DYNAMIC IP to connect to host. Otherwise, ATM uses STATIC
IP. If you change DHCP value from ENABLE to DISABLE, you should set up STATIC IP again use IP
ADDRESS, SUBNET MASK, GATEWAY and DNS buttons.
It is able to input up to 15 units such as XXX.XXX.XXX.XXX
5- 100
Advertisement
Table of Contents
