HYOSUNG MX-4000W Operator's Manual page 147

MX-4000W
5.8.7.2.1 ANTI SKIMMING
If you push (or touch) 'ANTI SKIMMING' button, the screen for configuring the specifications of anti
skimming will appear as depicted as below.
Each key has the function as explained as below.
1) EN/DISABLE: Used to determine whether ANTI SKIMMING will be used or not.
2) SHUTTER EN/DISABLE: Used to set the shutter up when an obstacle is attached to card reader.
3) TIME THRESHOLD: Used to determine the time interval when an obstacle is attached to card
reader. For example, if the value of 'TIME THRESHOLD' is set as 10 seconds, after 10 seconds
from the time when an obstacle would be attached to card reader, the ATM will recognize the
attack to card reader.
4) AUTO RECOVERY TIME: Used to determine the time interval for recovering an ATM. For
example, if the value of 'AUTO RECOVERY TIME' is set as 10 seconds, after 10 seconds from
the time when an obstacle would be removed from ATM, the ATM will be in normal condition.
5) APPLY: Used to apply the configuration of 'ANTI SKIMMING'.
5- 109
5. Operator Function