Table of Contents
Advertisement
MX-4000W
4. Mixed slanting and concave bundles
-To avoid dispensing problems caused by a slanting and cupped bundles, put the notes in neat
bundles of 100-200 notes.
-Place the prepared bundles with the cupped side nearest and towards the dispense opening.
-Turn every other bundle to face the other way to make the pile the same height at both sides, as
shown. It will make dispensing of notes from the VCDM easier.
-Always place the bundles containing old notes into the cassette first and bundles containing new
notes last.
5. Release the pusher plate
- Release the pusher plate towards the note pile.
6. Side aligning the pile
- Aligning the note pile by hand. Single note must not protrude from the bundle.
NOTE:
When loading the cash cassette full, make sure that the pusher plate don't exceed rear side guide.
(Maximum loading limit)
If the pusher plate exceed rear side guide, the notes will be difficult to dispense.
4 - 9
4. Operating Instructions
Advertisement
Table of Contents
