HYOSUNG MX-4000W Operator's Manual page 78

MX-4000W
Changing the TEST COUNT
The TEST COUNT means the number of test.
If you want to change the test count, press BLANK key or SET button then input the test count and
press ENTER key. To delete the test count while inputting, press CLEAR key. To cancel the test while
testing, press CANCEL key.
NOTE: TEST COUNT affects when testing RECEIPT PRINTER, CASH DISPENSER, and MODEM.
CASE:
1) If you input test count '0', the test count will be "UNLIMIT"
2) If you input test count 10, the test will perform 10 times.
3) If you cancel a test and then perform same test, the test count will be continue.
e.g. If you cancel a test when the tested count is 3, and then perform same test, the tested
count starts at 3.
4) If you cancel a test and then perform another test, the test count will be initialized.
e.g. If you cancel a test when the tested count is 3, and then perform another test, the tested
count starts at 0.
5- 40
5. Operator Function
BLANK Key