HYOSUNG MX-4000W Operator's Manual page 88

MX-4000W 5. Operator Function
5.6.6.2 FLICKER
This FLICKER contains ALL FLICKER SENSOR, EPP FLICKER, CDU FLICKER, SPR FLICKER
and MCU FLIKCER. Please press each button on this menu to change test mode ON, OFF or
FLICKING. To go back to the previous screen, press the CANCEL key in pinpad. In MX4000W, there
are no flickers attached to SPR, MCU, So 'N/A' would be displayed on the screen corresponding to the
blank of SPR, MCU.
[The screen except for MX4000W]
[The screen for MX4000W]
Accessing the SENSOR
1) Select DIAGNOSTICS in the OPERATOR FUNCTION.
2) Select AUXILIARY UNIT in the DIAGNOSTICS menu and then select FLICKER in the
AUXILIARY menu.
5- 50