Description Of Precaution Symbols - HYOSUNG MX-4000W Operator's Manual

MX-4000W

2.2 Description of Precaution Symbols

Symbol
Electrical Shock
• Do not remove cover. Only a maintenance engineer is allowed to open the cover.
• Do not touch. You may receive electric shock.
• Make sure to turn off the power when servicing the equipment.
High Temperature
• Do not touch the equipment when it is running.
• The equipment can get extremely hot and may cause a burn.
• Make sure to close the cover before running the equipment.
Be Careful when Moving
• The equipment is heavy. Make sure at least 2 people to lift or move the equipment.
• Do not attempt to move the equipment alone. You may be injured by dropping the
Fire Hazard
• Place the equipment in an area away from any combustible materials.
• The equipment may catch on fire from overheating or short circuit of the power supply
Disassembly
• Do not disassemble or modify the equipment unless you are a certified engineer.
• Contact the service center for maintenance, adjustments and repairs.
• Improper disassembly may cause fire or electrical shock.
Fall down
• Do not place the equipment where the floor cannot sustain the weight of the
• Equipment may fall down and cause injury or damage.
Unplug the Equipment
• Stop using the equipment immediately if it smokes, emits an unusual smell, makes
• If the above-mentioned abnormalities occur, immediately turn off the power, unplug
• If you ignore these symptoms, the equipment may catch on fire or cause electric shock.
heavy equipment.
unit.
equipment, or on slanted or unstable surface.
abnormal sounds, or if liquids or other foreign materials enter the equipment.
the equipment and contact the service center.
Description
2- 3
2. Precautions for Safety