Installation
Image 2-5
3.
Put the RAM service door back in place and fix it with the Security Torx screws.
2.4 WiFi/Bluetooth module installation
CAUTION: Prior to removing any service door, make sure the unit's power is off and disconnected
from the power sources to prevent electric shock or system damage.
To fully disengage the power to the unit, please disconnect the power cord from the AC inlet.
To install the WiFi/Bluetooth module
1.
Unscrew the Security Torx screws of the RAM service door, then remove the door.
Image 2-6
2.
Unscrew the 2 WiFi/Bluetooth module fastening screws.
Image 2-7
3.
Insert the WiFi/Bluetooth module in de dedicated slot.
12
K5903250 /07
JAO15 / JAO18