Cleaning
4.1 Cleaning instructions
To clean your JAO15 and JAO18
Clean the terminal using a sponge, cleaning cloth or soft tissue, lightly moistened with a recognized cleaning
product for medical equipment. Read and follow all label instructions on the cleaning product. In case of doubt
about a certain cleaning product, use plain water.
Possible cleaning solutions:
•
70% isopropyl alcohol
•
1.6% aqueous ammonia
•
Cidex® (2.4% glutaraldehyde solution)
•
Sodium hypochlorite (bleach) 10%
•
"Green soap" (USP)
•
0.5% Chlorehexidine in 70% isopropyl alcohol
•
Like Cleansafe® optical cleaning liquid
Do not use following products:
•
Alcohol/solvents at higher concentration > 70%
•
Strong alkalis lye, strong solvents
•
Acid
•
Detergents with fluoride
•
Detergents with ammonia at higher concentration > 1.6%
•
Detergents with abrasives
•
Steel wool
•
Sponge with abrasives
•
Steel blades
•
Cloth with steel thread
CAUTION: Take care not to damage or scratch the front glass or LCD. Be careful with rings or other
jewelry and do not apply excessive pressure on the front glass or LCD.
CAUTION: Do not apply or spray liquid directly to the terminal as excess liquid may cause damage
to internal electronics which may cause fire or electrical shock. Instead, apply the liquid to a
cleaning cloth.
In environments where specific chemicals or cleaning agents are used, please contact your local
Barco office.
22
K5903250 /07
JAO15 / JAO18