1.1 Key features Overview JAO15 and JAO18 are designed to serve as a Point of Care (POC) and Point of Information terminals (POI) within healthcare applications. Manufactured using anti-bacterial plastics, the terminals provide a host of interactive healthcare applications providing secure access to Electronic Medical Records (EMR) and innovative triple-play solutions (web, IPTV, VoIP) for patient entertainment.
Page 7
2 x headset line out jack • 2 x USB 2.0 connector (5V / 1.5A) • HDMI input connector Barcode scanner or 2 Smart Card Reader (optional on JAO18, not supported on JAO15) Rear IO area K5903250 /07 JAO15 / JAO18...
Page 8
CAUTION: The service doors may only be opened by qualified service personnel, no user serviceable parts inside. WARNING: To prevent possible hearing damage, check the volume before using the JAOHandset or headset line out and do not listen at high volume levels for long periods. K5903250 /07 JAO15 / JAO18...
2.1 Power connection Overview Connect the supplied external DC power supply to the +19 VDC power input of your JAO15 / JAO18. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper power cord delivered in the packaging.
To fully disengage the power to the unit, please disconnect the power cord from the AC inlet. To replace the RAM module Unscrew the Security Torx screws of the RAM service door, then remove the door. Image 2-4 Remove the current DDR3L RAM module and replace it with a new one. K5903250 /07 JAO15 / JAO18...
To install the WiFi/Bluetooth module Unscrew the Security Torx screws of the RAM service door, then remove the door. Image 2-6 Unscrew the 2 WiFi/Bluetooth module fastening screws. Image 2-7 Insert the WiFi/Bluetooth module in de dedicated slot. K5903250 /07 JAO15 / JAO18...
To fully disengage the power to the unit, please disconnect the power cord from the AC inlet. WARNING: To prevent possible hearing damage, check the volume before listening the JAOHandset and do not listen at high volume levels for long periods. K5903250 /07 JAO15 / JAO18...
Page 14
Remove the handset side door. Image 2-12 For JAO15 only: Insert the rubber (included in the accessories) as indicated below. Image 2-13 Connect the handset connector to the cable available behind the side door. Please make sure to connect the white dot to white dot pin.
To mount the JAO15 / JAO18 on a VESA solution Your JAO15 and JAO18 is compatible with the VESA 75 mm and VESA 100 mm standard, so it can be used on different VESA 75 and VESA 100 mounting solutions (arms, desk stands, ...).
Page 16
= T + W + 5.5 mm Image 2-17 CAUTION: Use only a mounting solution that is in compliance with VESA requirements. WARNING: The mounting screws included in the box of your JAO15 / JAO18 are only to be used with Barco mounting solutions. K5903250 /07...
3.3 USB charging Overview The bottom USB ports on the JAO15 and JAO18 are capable of delivering 5V/1.5A output. This means you will be able to charge almost any smartphone, camera, ebook reader, etc. by plugging them into the terminal bottom USB ports.
3.4 HDMI input Overview The JAO15 and JAO18 are capable of playing High Definition video and audio of any HDMI compatible device (gaming console, DVD player, camera, etc.) that is connected to the HDMI input of your terminal. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.
Cleaning 4.1 Cleaning instructions To clean your JAO15 and JAO18 Clean the terminal using a sponge, cleaning cloth or soft tissue, lightly moistened with a recognized cleaning product for medical equipment. Read and follow all label instructions on the cleaning product. In case of doubt about a certain cleaning product, use plain water.
• Adhere to all cautions, warnings and instructions on the equipment, safety instructions and user guide. Detailed product information and the user guide are available for download from the Barco website. Please go to www.barco.com. Electrical Shock or Fire Hazard •...
Page 25
Do not replace the battery yourself. Please contact a qualified technician or your supplier of the JAO15 / JAO18. There is a danger of leakage or explosion if the battery is incorrectly replaced. The JAO15 / JAO18 is provided with a battery-powered real-time clock circuit.
For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: http://www.barco.com/AboutBarco/weee Disposal of batteries in the product This product contains batteries covered by the Directive 2006/66/EC which must be collected and disposed of separately from municipal waste.
Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur. [Republic of Turkey: In conformity with the WEEE Regulation] 5.3 RF information Hereby, Barco NV declares that this device is in compliance with the Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.barco.com/jao/ce/ The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
Page 28
WARNING: Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the JAO15 / JAO18, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
Indicates the device is approved according to the CCC regulations Indicates the device is approved according to the VCCI regulations Indicates the device is approved according to the KC regulations Indicates the device is approved according to the BSMI regulations K5903250 /07 JAO15 / JAO18...
Page 31
Indicates this device must not be thrown in the trash but must be recycled, according to the European WEEE (Waste Electrical and Electronic Equipment) directive Indicates Direct Current (DC) Indicates Alternating Current (AC) Stand-by Values for xx and yy can be found in the technical specifications paragraph. K5903250 /07 JAO15 / JAO18...
Page 32
Indicates the range of atmospheric pressure to which the device can be safely 106 kPa exposed when being stored. 50 kPa Values for xx and yy can be found in the technical specifications paragraph. K5903250 /07 JAO15 / JAO18...
Barco software products are the property of Barco. They are distributed under copyright by Barco NV or Barco Inc., for use only under the specific terms of a software license agreement between Barco NV or Barco Inc. and the licensee. No other use, duplication, or disclosure of a Barco software product, in any form, is authorized.
Important information 5.7 Technical specifications Dimension drawing JAO15 418.0 ± 0.1 mm 50.0 ± 0.1 mm 294.7 ± 0.1 mm 59.2 ± 0.1 mm 64.1 ± 0.1 mm 32.1 ± 0.1 mm 75.0 ± 0.1 mm 100.0 ± 0.1 mm...
Page 35
48.0 ± 0.1 mm 87.8 ± 0.1 mm 66.0 ± 0.1 mm 165.7 ± 0.1 mm 62.5 ± 0.1 mm 99.6 ± 0.1 mm 32.1 ± 0.1 mm 75.0 ± 0.1 mm 100.0 ± 0.1 mm Image 5-2 K5903250 /07 JAO15 / JAO18...
Page 36
15.6" WXGA (1366 x 768), Wide-screen (aspect ratio 16:9) Large viewing angle (160°/160° hor/ver typ) Long lifetime (50,000 hrs MTBF) Backlight LED, High luminance (300 cd/m2 typ) Backlight brightness (+ on/off) controllable by software (GPIO) Intel® Celeron® Processor J1900 System-on-Chip (SoC) K5903250 /07 JAO15 / JAO18...
Page 37
Fanless design with passive cooling concept, no vents, no moving parts IP65 front face Certifications CE, EN 60601-1, UL 60601-1, IEC60950-1 CB ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No.60601-1 Color Barco White cover, Black bezel front glass Dimensions 418 x 270 x 50 mm VESA mount, 75x75 and 100x100 compatible Weight 4.2 kg Power 19V DC input, 4.74A current rating, medical wide AC-input power supply...
Page 38
AMI BIOS, 8M-bit SPI ROM DMI information with unique identifier information Storage capacity 2.5" Storage bay Standard 32 GB SSD installed System memory 1 slot DDR3L 1333 SO-DIMM socket, Support up to 8GB capacity Standard 2 GB installed K5903250 /07 JAO15 / JAO18...
Page 39
Fanless design with passive cooling concept, no vents, no moving parts IP65 front face Certifications CE, EN 60601-1, UL 60601-1, IEC60950-1 CB ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No.60601-1 Color Barco White cover, Black bezel front glass Dimensions 482 x 309 x 48 mm VESA mount, 75x75 and 100x100 compatible Weight 4.8 kg Power 19V DC input, 4.74A current rating, medical wide AC-input power supply...