Image 2-2
2.
Remove the current SSD/HDD and replace it with a new one.
Image 2-3
3.
Put the SSD/HDD service door back in place and fix it with the Security Torx screws.
2.3 RAM module replacement
CAUTION: Prior to removing any service door, make sure the unit's power is off and disconnected
from the power sources to prevent electric shock or system damage.
To fully disengage the power to the unit, please disconnect the power cord from the AC inlet.
To replace the RAM module
1.
Unscrew the Security Torx screws of the RAM service door, then remove the door.
Image 2-4
2.
Remove the current DDR3L RAM module and replace it with a new one.
Installation
K5903250 /07
JAO15 / JAO18
11