Key features Overview JAO15 and JAO18 are designed to serve as a Point of Care (POC) and Point of Information terminals (POI) within healthcare applications. Manufactured using anti-bacterial plastics, the terminals provide a host of interactive healthcare applications providing secure access to Electronic Medical Records (EMR) and innovative triple-play solutions (web, IPTV, VoIP) for patient entertainment.
Image 1-1 1. Camera 720p camera with white LED 2. Barcode scanner (optional on JAO18, not supported on JAO15) 3. Multipurpose, configurable power key Please refer to the SDK documentation for more information about the different power key configura- tion options.
Page 7
- 2 x headset line out jack - 2 x USB 2.0 connector (5V / 1.5A) - HDMI input connector 7. Barcode scanner (optional on JAO18, not supported on JAO15) 8. Rear IO area Image 1-4 - Functional earth blind fastener...
Overview 1. Connect the supplied external DC power supply to the +19 VDC power input of your JAO15 / JAO18. 2. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper power cord delivered in the packaging.
To fully disengage the power to the unit, please disconnect the power cord from the AC inlet. To replace the RAM module 1. Unscrew the Security Torx screws of the RAM service door, then remove the door. Image 2-4 K5903250 JAO15 / JAO18 10/03/2016...
2. Take apart the mounting bracket from the handset cradle and rotate the bracket 180°. 3. Reassemble the handset cradle with the 2 fixation screws and reinsert the screw caps. Image 2-6 The JAOHandset can now be attached to your terminal as described in the next procedure. K5903250 JAO15 / JAO18 10/03/2016...
To mount the JAO15 / JAO18 on a VESA solution Your JAO15 and JAO18 is compatible with the VESA 75 mm and VESA 100 mm standard, so it can be used on different VESA 75 and VESA 100 mounting solutions (arms, desk stands, ...).
Page 13
Image 2-11 Use only a mounting solution that is in compliance with VESA requirements. AUTION The mounting screws included in the box of your JAO15 / JAO18 are only to ARNING be used with Barco mounting solutions. K5903250 JAO15 / JAO18 10/03/2016...
The electrical signal of the service call button in the JAOHandset and the status LED of the JAOHandset can be detected/controlled on the RJ11 Service Call connector of your JAO15 / JAO18. Please refer to the connector pinout below for more details. The electrical signal requirements are available in the technical specification tables of this user guide (see "Technical specifications", page 28).
USB charging Overview The bottom USB ports on the JAO15 and JAO18 are capable of delivering 5V/1.5A output. This means you will be able to charge almost any smartphone, camera, ebook reader, etc. by plugging them into the terminal bottom USB ports.
4. CLEANING Cleaning instructions To clean your JAO15 and JAO18 Clean the terminal using a sponge, cleaning cloth or soft tissue, lightly moistened with a recognized clean- ing product for medical equipment. Read and follow all label instructions on the cleaning product. In case of doubt about a certain cleaning product, use plain water.
• Adhere to all cautions, warnings and instructions on the equipment, safety instructions and user guide. Detailed product information and the user guide are available for download from the Barco website. Please go to www.barco.com. Electrical Shock or Fire Hazard •...
• The equipment can be cleaned regularly according to usage. In environments where specific chemi- cals or cleaning agents are used, please contact your local Barco office. • Do not apply or spray liquid directly to the equipment as excess liquid may cause damage to internal electronics which may cause fire or electrical shock.
Do not replace the battery yourself. Please contact a qualified technician or your supplier of the JAO15 / JAO18. There is a danger of leakage or explosion if the battery is incorrectly replaced. The JAO15 / JAO18 is provided with a battery-powered real-time clock circuit.
5.3.1 USA information Indications for use The JAO15 and JAO18 are intended to be used at the patient bedside, for the purpose of patient enter- tainment, patient information, patient communication (phone and video phone), patient administration and service calls. The JAO15 and JAO18 additionally allow for remote access to hospital systems by trained professional users.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environ- nement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. K5903250 JAO15 / JAO18 10/03/2016...
Using another can result in a decrease of the immunity level of the device. Electromagnetic emissions The JAO15 / JAO18 is intended for use in the electromagnetic environment specified below. The customer or the user of the JAO15 / JAO18 should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment –...
Page 25
= 1.2√P 80 MHz to 800 d = 2.3√P 800 MHz to 2.5 1. is the a.c. mains voltage prior to application of the test level. 2. JAO15 / JAO18 doesn’t contain susceptible components to magnetic fields K5903250 JAO15 / JAO18 10/03/2016...
Page 26
RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the JAO15 / JAO18 is used exceeds the applicable RF compliance level above, the JAO15 / JAO18 should be observed to verify normal operation.
5. For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter. Where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. K5903250 JAO15 / JAO18 10/03/2016...
Page 28
Indicates this device must not be thrown in the trash but must be recycled, according to the European WEEE (Waste Electrical and Electronic Equipment) directive 6. Values for xx and yy can be found in the technical specifications paragraph. K5903250 JAO15 / JAO18 10/03/2016...
Page 29
Indicates that the box should not be cut with a knife, a cutter or any other sharp object. Indicates the temperature limits to which the device can be safely exposed when being stored. +60 °C -20 °C K5903250 JAO15 / JAO18 10/03/2016...
Barco software products are the property of Barco. They are distributed under copyright by Barco NV or Barco Inc., for use only under the specific terms of a software license agreement between Barco NV or Barco Inc. and the licensee. No other use, duplication, or disclosure of a Barco software product, in any form, is authorized.
Page 31
EU + US power cord standard Dimensions 418 x 270 x 50 mm VESA mount, 75x75 and 100x100 compatible Color Barco White cover, Black bezel front glass Certifications CE, FCC class B, EN 60601-1, UL 60601-1, IEC60950-1 CB ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No.60601-1 Weight 4.2 kg...
Page 32
Optionally available from Custom Configuration Program, integrated WiFi Combo WiFi 802.11b/g/n + Bluetooth Mini PCIe module Optionally available from Custom Configuration Program, integrated Barcode scanner 2D Barcode scanner Optionally available from Custom Configuration Program, integrated K5903250 JAO15 / JAO18 10/03/2016...
Page 33
EU + US power cord standard Dimensions 482 x 309 x 48 mm VESA mount, 75x75 and 100x100 compatible Color Barco White cover, Black bezel front glass Certifications CE, FCC class B, EN 60601-1, UL 60601-1, IEC60950-1 CB ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No.60601-1 Weight 4.8 kg...
Page 34
Operating temperature 0°C to 40 °C Storage temperature -20°C to 60°C Operating humidity 20% to 80% (non-condensing) Storage humidity 20% to 80% (non-condensing) Operating pressure 50 kPa to 106 kPA Operating altitude Up to 3000m K5903250 JAO15 / JAO18 10/03/2016...
Page 35
Dimension drawing JAO18 482.0 ± 0.1 mm 48.0 ± 0.1 mm 87.8 ± 0.1 mm 66.0 ± 0.1 mm 165.7 ± 0.1 mm 62.5 ± 0.1 mm 99.6 ± 0.1 mm 32.1 ± 0.1 mm Image 5-2 K5903250 JAO15 / JAO18 10/03/2016...