Table of Contents
Advertisement
Position of the direction selection lever for feed motion:
5.1.3 Manual feed
The lever
(→ Fig. 26-1)
• Each time the lever is pushed or pulled, this causes a feed motion for trimming or sectioning by the
value set on the scaled adjusting knob
Leica SM2010 R
Turning in a clockwise direction moves the specimen towards the knife.
Turning in a counter clockwise direction moves the specimen towards the knife.
Neutral:
Turning the coarse driving wheel does not result in a feed motion.
The coarse driving wheel does not turn as well during sectioning.
for the manual feed is at the front right of the instrument.
(→ Fig.
2
Fig. 26
26-2).
1
5
Operation
31
Advertisement
Table of Contents
