4
Instrument Setup
• Using the blade holder, move the segment arc until the index mark coincides with that of the desired
setting.
• Hold down the blade holder in this position and retighten the screw
Enlarged detail: Scale for setting the clearance angle.
Example: Enlarged detail showing a clearance angle setting of 4°.
Note
The recommended clearance angle setting for the blade holder is approx. 4°.
4.7
Inserting the universal cassette clamp
The object orientation allows for simple position correction of the specimen surface when the specimen
is clamped into place.
You can use the quick clamping system
clamps (for more information, see
To do so, proceed as follows:
• Move the object head
(→ Fig.
22-2).
28
(→ Fig. 23-2)
(→ 7. Optional
(→ Fig. 22-1)
to the lower end position by turning the coarse driving wheel
2
Fig. 22
(→ Fig. 21-4)
to hold all the available accessory specimen
accessories-2)).
for clamping.
1
Version 1.8, Revision I