Setup - Leica SM2010 R Instructions For Use Manual

4.4

Setup

Warning
Do not transport the instrument by holding it by moving parts, on the knife sledge, coarse driving
wheel or the knob for setting the section thickness.
• To lift the instrument from the box, hold it on the left and right of the housing
the foam cushion of the package and place it on a stable lab table.
• Remove all adhesive tape used as transport anchors.
Loosening the transport locking screw of the knife sledge
Note
The locking knob
In daily operation, it is also used to lock the knife sledge in place.
Leica SM2010 R
Fig. 5
(→ Fig. 6-1) secures the knife sledge during transport.
Fig. 6
1
Instrument Setup
(→ Fig. 5), lift it out of
4
17