Crestron REFERENCE OD4.1-4-S10-BRZ-T KIT Quick Start Manual page 3

4.1 landscape solution, bronze textured, four 4 in. satellites, one 10 in. subwoofer

Hide thumbs Also See for REFERENCE OD4.1-4-S10-BRZ-T KIT:

Table of Contents

REFERENCE OD4.1-4-S10-BRZ-T KIT

Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer

4. Once the speakers are laid out in their final locations and the wiring is

completed per this installation guide, install the speakers as follows:

a. Pull the speaker cable through the top of the stake and out either

side on the bottom opening (see figure B).

b. Drive the ground stake (included) into the ground.

For installation in soft soil: The stake can be installed without

excavating the soil. Push the stake down into the soil.

For installation in hard soil: Dig a hole for the stake. Place the

stake in the hole with the top cylinder of the stake above

ground level. Hold the stake straight while backfilling and

compacting the soil.

c. Attach the speaker to the stake by turning the speaker clockwise

until it is mounted properly (see figure B).

Figure B

Quick Start

Table of Contents

Need help?

Do you have a question about the REFERENCE OD4.1-4-S10-BRZ-T KIT and is the answer not in the manual?