Crestron REFERENCE OD4.1-4-S10-BRZ-T KIT Quick Start Manual
Crestron REFERENCE OD4.1-4-S10-BRZ-T KIT Quick Start Manual

Crestron REFERENCE OD4.1-4-S10-BRZ-T KIT Quick Start Manual

4.1 landscape solution, bronze textured, four 4 in. satellites, one 10 in. subwoofer
Hide thumbs Also See for REFERENCE OD4.1-4-S10-BRZ-T KIT:

Advertisement

REFERENCE OD4.1-4-S10-BRZ-T KIT
Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer
The Crestron®
REFERENCE OD4.1-4-S10-BRZ-T KIT
made by Origin Acoustics provides the full impact of your music
outdoors with tremendous coverage, excellent stereo imaging, and rich,
deep bass.
The 4.1 kit includes four weatherproof 2-way outdoor satellite speakers
and an in-ground subwoofer. The satellite outdoor speakers are
designed to be staked directly into the ground with the supplied ground
stakes.
NOTE:
For individual speaker documentation, refer to
OD4-BRZ-T-EACH
Quick Start (Doc. 9033).
In the Box
1
REFERENCE OD4.1-4-S10-BRZ-T KIT
 
 
 
Additional Items
4
Satellite speakers
4
Ground stakes
1
In ground subwoofer
8
Wire nuts
landscape solution
Speaker Layout Planning
The Landscape satellite speakers and subwoofer should be placed evenly
to distribute sound throughout the outdoor area. Fully plan out the
locations of all satellite speakers and the subwoofer before beginning
the installation process.
REFERENCE
Speaker Location
The satellite speakers
from 8 to 10 feet (2.4 to 3 meters) apart for best coverage (see figure
A). One satellite speaker will provide sound to about 200 to 500 sq ft,
depending on your loudness requirements. The speakers can be installed
at ground level using stakes (included).
NOTE:
For longer stakes use the
Subwoofer Location
Select a location for the subwoofer near the middle of the satellite
speaker arrangement (see figure A). The subwoofer will provide bass to
approximately a 1500 sq ft area.
Installation
REFERENCE OD4-BRZ-T-EACH
The included stakes measure about 12.43 in. (316 mm) in length.
SPKA-STAKE-OD-18
Quick Start
should be placed
optional accessory.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REFERENCE OD4.1-4-S10-BRZ-T KIT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Crestron REFERENCE OD4.1-4-S10-BRZ-T KIT

  • Page 1 Quick Start REFERENCE OD4.1-4-S10-BRZ-T KIT Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer The Crestron® REFERENCE OD4.1-4-S10-BRZ-T KIT landscape solution made by Origin Acoustics provides the full impact of your music Installation outdoors with tremendous coverage, excellent stereo imaging, and rich, deep bass.
  • Page 2: Speaker Installation

    Quick Start REFERENCE OD4.1-4-S10-BRZ-T KIT Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer Figure A Install the Speaker and Subwoofer Speaker Installation  1. Place the four satellite speakers in their approximate final locations.  2. Dig a 4 to 5 in. (102-127 mm) deep trench to run the speaker cables (not included) that will run from the amplifier to each speaker's hardwired direct-burial cable (included).
  • Page 3 Quick Start REFERENCE OD4.1-4-S10-BRZ-T KIT Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer  4. Once the speakers are laid out in their final locations and the wiring is  c. Attach the speaker to the stake by turning the speaker clockwise completed per this installation guide, install the speakers as follows: until it is mounted properly (see figure B).
  • Page 4: Subwoofer Installation

    Quick Start REFERENCE OD4.1-4-S10-BRZ-T KIT Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer Subwoofer Installation  3. Prepare a flat bed for the subwoofer that is free of voids and large rocks (see figure C).  1. Place the subwoofer in its approximate final location.
  • Page 5: Connect The Speaker Cable

    Quick Start REFERENCE OD4.1-4-S10-BRZ-T KIT Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer Connect the Speaker Cable  5. Use a round cable stripper (not included) to strip the insulation approximately 0.75 in. (19 mm) of copper as shown in figure E.
  • Page 6 Quick Start REFERENCE OD4.1-4-S10-BRZ-T KIT Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer  6. Starting with the first speaker, cut the cable loop as shown in figure  8. Secure the three positive (+) cables together (cable from the...
  • Page 7 Quick Start REFERENCE OD4.1-4-S10-BRZ-T KIT Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer  12. The subwoofer needs to be connected in the same manner as the NOTES: satellite speaker (see figure H).   The speaker includes a hardwired direct-burial speaker cable.
  • Page 8 Quick Start REFERENCE OD4.1-4-S10-BRZ-T KIT Reference 4.1 Landscape Solution, Bronze Textured, Four 4 in. Satellites, One 10 in. Subwoofer  13. After all speakers and subwoofer connections are completed (see figure J), connect the speaker cables to the amplifier. Figure J...
  • Page 9: Additional Information

    Service Providers (CSPs) under a limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_agreement. http://www.crestron.com/model/6512253  ...

Table of Contents