Table of Contents
Advertisement
OUTPUT MODE & TIMING FOR OUTPUT 1
The two relay outputs are programmable for Start/Stop or Timing modes. Apart from door access
control, alarm arm-disarm control, they are also universal timers for automatic operators in
industry with their 99,999 seconds (over 24 hours) programmable timer.
LOCATIONS
(1) LOCATIONS
-- Location for Output 1
(2) OUTPUT MODE & TIMING
Start /Stop Mode (Toggle)
The number 0 sets the output to Start / Stop mode. The output Starts when an User Code
and/or Card is entered/read; the output Stops when an User Code and/or Card is
entered/read again.
(3) VALIDATION
Press
key once. Two-beeps confirms the entry.
RESET OUTPUT TIMER WITH SUPER USER CODE
The Output Timer can be RESET manually at anytime with the Super User Code that operates
the desired output before the end of the time.
Example:
Reset Output 1 Timer --
OUTPUT MODE & TIME
or
(1)
-- Seconds Momentary --- (Default -- Momentary 5 Seconds)
The output can be set in Momentary Mode with the time of 1 second to
99,999 seconds. The output will reset automatically when the time
expires.
SUPER USER CODE
-
(2)
------------- Output 1 stops
(Locations 51 & 52)
VALIDATION
(3)
Advertisement
Table of Contents
