Table of Contents
Advertisement
EXAMPLES – PROGRAMMING AND OPERATION
1) Example 1 -- EM Card Only :
i) Programming :
(a)
(b)
(c)
(a) The card is programmed for operating Output 1
(b) The operation is medium EM Card only
(c) Take ID number 001 in Group 1 to store the card, which is one of the IDs in 000-999
(d) Put the card close to the reader, one beep confirms the reading
(e) Press # to store the "Card", two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
Read Card
(a)
(a) Read the EM card. Two-beep confirms the card is read and Output 1 activates
2) Example 2 -- Private User Code Only :
i) Programming :
(a)
(b)
(c)
(a) The Private User Code is programmed for operating Output 1
(b) The operation medium is Private User Code only
(c) Take ID number 002 in Group 1 to store the Private User Code, which is one of the IDs in
000-999
(d) Put Private User Code "1 2 3 4" into the storage location
(e) Press # to store the "Private User Code", two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
(a)
(b)
(a) Key in the Private User Code "1 2 3 4"
(b) Confirm it with the # key. Output 1 activates
Read Card
(d)
(e)
(d)
(e)
Advertisement
Table of Contents
