OPERATION MODES
The keypad is programmable for keypad mode to work stand-alone for door control directly or for
server mode to work with a split-decoder for high security access control.
LOCATION
(1)
(1) LOCATION
Key in Location
(2) OPERATION MODES
– Keypad Mode (Default)
Keypad Mode sets the keypad for stand-alone operation to provide its available functions. It is
compatible with the auxiliary readers/keypads for multi-station expansion.
– Server Mode
Server Mode sets the keypad to compatible with both the decoder for split-decoded operation and
the auxiliary readers/keypads for multi-station expansion. A split decoded keypad system uses the
keypad(s) for human interface outside and the internal decoder for door lock control to prevent
sabotage.
(3) VALIDATION
Press
key once. Two-beep confirms the entry
CLOSE PROGRAMMING MODE
Always close programming mode with * * to set system back to normal Operation after
programming.
VALIDATION
------------------------------- System is back to normal operation mode
OPERATION MODES
or
(2)
(Location 94)
VALIDATION
(3)
( * * )