Common User Codes For Output 1 - AEI DK-2890 User Manual

COMMON USER CODE FOR OUTPUT 1
The Common User Code 1 is prepared for operating Output 1 as an enhance code. The Common
User Code MUST work in the form of "Card + Common Code" to operate the output to increase the
security of the access control system. See Media 4 at Location 10 for more information.
NOTE: Common User Code alone can NOT operate the Outputs directly.
LOCATION

(1)
(1) LOCATION
-- Location Stores The Common User Code for Output 1
(2) COMMON USER CODES
The Common User Code can be 4 to 8 digits.
When a new Common User Code is keyed in and confirmed, the old one is replaced.
(3) VALIDATION

Pressing key to confirm code entry.
Example:
a) Set a Common User Code "1 3 5 7" for Output 1 ----
b) Deleted a Common User Code from memory: Key in the Location number and #. ----
COMMON USER CODE
4 to 8 Digits
(2)

(Location 03)
VALIDATION

(3)