Table of Contents
Advertisement
USER CODES / CARDS FOR OUTPUT 1
Total 1,100 User Codes / Cards are available for controlling of the two outputs.
LOCATION
MEDIA
(1)
(1) LOCATION
– Group 1 – 1,000 User Codes / Cards for controlling Output 1
(2) MEDIA (Operation Media)- please also see page
– Cards Only – 125Khz Proximity EM Card
– User Codes Only – 4-8 Digits
– Cards + Secondary User Code(s) – See Note (a)
– Cards + Common User Code – See Note (b)
– Delete Cards / User Codes from the selected User ID – See Note (c)
– Group Clearing. Clear all the User Codes & Cards of the selected User Group
Location. Clearing takes few seconds to a minute.
(3) USER ID (The IDs of The User Codes and Cards)
–
(4) CARD / USER CODE
Read EM Card or key in User Code into each assigned User ID.
(5) VALIDATION
Press the
key once. Two-beep confirms the entry.
NOTE:
(a) The Secondary User Code is a user code putting after a card in programming. It can be a
proprietary user code for each user card or a code repeatedly used for a group of user cards as
group user code (e.g. for a group of staff working in the same department).
(b) The Common User Codes for the Output 1 has been programmed first at Locations 03. It is not
necessary to key in the code again in programming here and it will follow the card automatically
after the card is read.
(c) Deletion of an User Code or Card (if the card was lost) can be done by keying-in its ID number.
For deleting an existing cards, simply read the card once and confirm. It does not require the ID
number. The Card includes the combinations of (1) Card Only, (2) Card + Secondary User Code
and (3) Card + Common User Code.
USER ID
(2)
(3)
– 1,000 User IDs for the User Codes & Cards in User Group 1 (Output 1)
CARD / USER CODE
10
for more information of their security level
(Location 10)
VALIDATION
(4)
(5)
Advertisement
Table of Contents
