Table of Contents
Advertisement
3) Example 3 -- EM Card + Secondary User
i) Programming :
(a)
(b)
(a) The card is programmed for operating Output 1
(b) The operation medium is EM Card + Secondary User Code
(c) Take the ID number 003 in Group 1 to store the Card & Code, which is one of the IDs in 000-999
(d) Put the card close to the reader. One beep confirms the reading
(e) Put Secondary User Code "2 4 6 8 0" after reading of card
(f) Press # to store the "Card + Secondary User Code", two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
Read Card
(a)
(a) Read the EM card. Two-beep confirms the reading and 30 seconds waiting time is given for
entry of the User Code, the Amber LED keeps flashing
(b) Key in the Secondary User Code "2 4 6 8 0"
(c) Confirm it with the # key. Output 1 activates
4) Example 4 -- EM Card + Common User Code:
i) Programming :
(a)
(b)
(a) The card is programmed for operating Output 1
(b) The operation medium is "EM Card + Common User Code"
(c) Take ID number 004 in Group 1 to store the card, which is one of the IDs in 000-999
(d)
Read the EM card. One beep confirms the reading. (No need to key in a Common User Code but
there MUST be a Common User Code already recorded in Location 03.
(e) Press # to store the "Card". Two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
Read Card
(a)
(a) Read the EM card. Two-beep confirms the reading and 30 seconds waiting time is given for entry
of the Common User Code, the Amber LED keeps flashing
(b) Key in the Common User Code "1 3 5 7" (the number programmed in "Location 03" for Output
1 in the previous Example)
(c) Confirm it with the # key. Output 1 activates
Read Card
(c)
(d)
(b)
(c)
Read Card
(c)
(d)
Common User Code
(b)
:
Code
(e)
(f)
(e)
(c)
Advertisement
Table of Contents
