Table of Contents
Advertisement
FUNCTION
LOCATION
Egress Delay Warning &
9 0
Alarm
Operation Mode
9 4
SYSTEM
CODES
Factory Set Master Code for User to set
system in programming Mode at the first
time.
0 0 0 0
THIS IS NOT A PERMANENT SYSTEM
CODE & IT IS CHANGED IF A NEW
MASTER CODE IS PROGRAMMED.
REFRESH CODE -- Refresh the system
9 9 9 9
and set all its function back to default
values.
DAP CODE-- Direct access to
2 8 2 8
programming mode. Valid only in the
power-up delay period
USER Codes / Cards whole group
clearing Code for the selected Location
LOCATIONS:
10--- User Group 1
0 9 9 9
20--- User Group 2
40--- Vistor Group
* *
Exit Programming Code
ENTRY LIMITS & CODE
OPTIONS
CODE 1 - FUNCTION
MODE:
1---Momentary, No warning
2---Momentary, with
warning
4---Hold Contact, No
warning
5---Hold Contact, with
warning
CODE 2 - DELAY TIME:
0---No Delay
1-99 Seconds
FUNCTION MODE:
0---Keypad Mode
1---Server Mode
FUNCTION
CODE ENTRY
CODE 1
MODE
CODE ENTRY
OR
NEW MASTER CODE
LOCATION NO.
FACTORY
DEFAULT
Mode = 1
Momentary,
No warning
CODE 2
TIME = 0
No Delay
Mode = 0
Keypad
Mode
RESULTS
System in
Programming Mode
All programmed
data are cleared
and back to the
default values
except the Master
Code
System in
Programming Mode
Whole group
of users in the
selected location
are cleared
The system back
to normal opration
after programming
Advertisement
Table of Contents
