Pid Technology Controller - Siemens SINAMICS G120 Operating Instructions Manual

Functions
7.9 Application-specific functions
7.9.4

PID technology controller

The technology controller permits all types of simple process controls to be implemented.
You can use the technology controller for e.g. pressure controllers, level controls or flow
controls.
Figure 7-20
Principle of operation
The technology controller specifies the speed setpoint of the motor in such a way that the
process variable to be controlled corresponds to its setpoint. The technology controller is
designed as a PID controller, which makes it highly flexible.
The technology controller setpoint is entered via an analog input or via the fieldbus.
Table 7- 45
Parameter
P2200 = ...
P2201 ... r2225
P2231 ... P2248
P2251 ... r2294
P2345 = ...
Additional information about this function is provided in the parameter list and in the function
diagrams 7950 ... 7958 in the List Manual.
210
Example: technology controller as a level controller
Technology controller parameters
Description
Enable technology controller
Fixed speeds for the technology controller
Motorized potentiometer for the technology controller
General adjustment parameters of the technology controller
Changing the fault reaction for the technology controller
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2011, FW 4.4, A5E02299792B AB