Siemens SINAMICS G120 Operating Instructions Manual page 188

Functions
7.9 Application-specific functions
Procedure
● Go to the "Units" tab in the configuration screen form to change over the units.
③
④
⑤
Figure 7-11
● Save your settings
● Go online.
● Accept these settings in the converter.
186
Changing over the unit system
Selecting process variables of the technology controller
adapting to the line supply
Unit changeover
In this case, the converter detects that other units or process variables have been set
offline than are actually in the converter; the converter displays this in the following
screen form:
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2011, FW 4.4, A5E02299792B AB