Guide Through This Manual - Siemens SINAMICS G120 Operating Instructions Manual

Introduction

1.2 Guide through this manual

1.2 Guide through this manual
In this manual, you will find background information on your inverter, as well as a full
description of the commissioning procedure:
12
① Should you be unfamiliar with assigning
parameters to the inverter, background
information can be found here:
• Adapting the inverter in line with the
application (Page 13)
• Frequently required parameters (Page 14)
• Extended scope for adaptation (Page 16)
②
Information on the inverter hardware can be
found here:
• Modularity of the converter system
(Page 21)
All information relating to the commissioning of
your inverter is located in the following
chapters:
③
• Procedure for installing the frequency
inverter (Page 27)
④
• Commissioning (Page 55)
• Adapt terminal strip (Page 89)
• Configuring the fieldbus (Page 101)
⑤
• Data backup and standard commissioning
(Page 81)
⑥
Information regarding the maintenance and
diagnostics of your inverter is located in the
following chapters:
• Service and maintenance (Page 241)
• Alarms, faults and system messages
(Page 245)
⑦ The most important technical data for your
inverter is located in this chapter:
• Technical data (Page 263)
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2011, FW 4.4, A5E02299792B AB