Siemens SINAMICS G120 Operating Instructions Manual page 219

Table 7- 49
Free function blocks
Logic modules
AND, OR, XOR, NOT
Arithmetic blocks
ADD, SUB, MUL, DIV, AVA, NCM, PLI
Time modules
MFP, PCL, PDE, PDF, PST
Memories
RSR, DSR
Switches
NSW
Switches
BSW
Controllers
LIM, PT1, INT, DIF
Limit value monitoring
LVM
✓: The block can be assigned to the runtime group
Analog signal scaling
If you interconnect a physical quantity, e.g. speed or voltage to the input of a free function
block using BICO technology, then the signal is automatically scaled to a value of 1. The
analog output signals of the free function blocks are also available as scaled quantities (0 ≙
0 %, 1≙ 100 %).
As soon as you have interconnected the scaled output signal of a free function block to
functions, which require physical input quantities - e.g. the signal source of the upper torque
limit (p1522) - then the signal is automatically converted into the physical quantity.
The quantities with their associated scaling parameters are listed in the following:
• Speeds
• Voltage values
• Current values
• Torque values
• Power values
• Angle
• Acceleration
• Temperature
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2011, FW 4.4, A5E02299792B AB
Runtime groups and possible assignments of the free function blocks
-: The block cannot be assigned to this runtime group
Runtime groups 1 ... 6 with associated time slices
1
8 ms
✓
-
-
✓
-
✓
-
-
P2000 Reference speed
P2001 Reference voltage
P2002 Reference current
P2003 Reference torque
P2004 Reference power
P2005 Reference angle
P2007 Reference acceleration (≙100%)
100 °C ≙ 100 %
7.9 Application-specific functions
2 3 4
16 ms 32 ms 64 ms
✓ ✓ ✓
- - -
- - -
✓ ✓ ✓
- - -
✓ ✓ ✓
- - -
- - -
(≙100%)
(≙100%)
(≙100%)
(≙100%)
(≙100%)
(≙100%)
Functions
5 6
128 ms 256 ms
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
217