Aux Input And Output Commands - Stanford Research Systems SR865A Operation Manual

116 Programming

Aux Input and Output Commands

OAUX? [ j ]
The
OAUX? j
1–4 on the rear panel.
Example
OAUX? 0
OAUX? 1
AUXV(?) [ j ] { , v { NV | UV | MV | V } }
The AUXV? j, v
aux output 1–4 on the rear panel. The voltage v can be set from –10.5 V to +10.5 V.
Example
AUXV 2, 678.9 MV
AUXV 2, 6.789E-1
AUXV 2, 0.6789
AUXV? 2
SR865A DSP Lock-in Amplifier
query returns an aux input voltage. The parameter j (0–3) selects aux input
Returns the aux in1 voltage v
Returns the aux in2 voltage v
command sets an aux output to voltage v. The parameter j (0–3) selects
Set aux out3 to 678.9 mV
Returns the aux out3 voltage setting in Volts
Chapter 4