Stanford Research Systems SR865A Operation Manual page 139

Chapter 4
GAUT [ DAT1 | DAT2 | DAT3 | DAT4 | j ]
The GAUT j
same as pressing the
The value of j (0–3) corresponds to the
DAT4
Example
GAUT DAT3
GAUT 2
GACT [ DAT1 | DAT2 | DAT3 | DAT4 | j ]
The
GACT j
channel j. This command is the same as pressing the
The value of j (0–3) corresponds to the
DAT4
Example
GACT DAT1
GACT 0
GAUF [ DAT1 | DAT2 | DAT3 | DAT4 | j ]
The GAUF j
same as pressing the
The value of j (0–3) corresponds to the
DAT4
Example
GAUF DAT4
GAUF 3
CGRF(?) [ DAT1 | DAT2 | DAT3 | DAT4 | j ] { , { OFF | ON | i } }
The
CGRF j, i
The value of j (0–3) corresponds to the
DAT4
Example
CGRF DAT2, ON
CGRF 1, 1
CGRF 0, OFF
CGRF? 1
CGRF? DAT2
command performs an Auto Scale on data channel j. This command is the
button in the scale palette.
(orange) data channels.
Auto Scale data channel 3 (yellow)
command performs an Auto Scale keeping zero at the center on data
(orange) data channels.
Auto Scale zero center data channel 1 (green)
command performs an Auto Find on data channel j. This command is the
button in the scale palette.
(orange) data channels.
Auto Find data channel 4 (orange)
command turns the graph of data channel j off (i=0) or on (i=1).
(orange) data channels.
Turn graphing on for data channel 2 (blue)
Turn graphing off for data channel 1 (green)
Returns data channel 2 (blue) graphing state i
(green), (blue),
DAT1 DAT2
button in the scale palette.
(green), (blue),
DAT1 DAT2
(green), (blue),
DAT1 DAT2
(green), (blue),
DAT1 DAT2
SR865A DSP Lock-in Amplifier
Programming 121
(yellow) and
DAT3
(yellow) and
DAT3
(yellow) and
DAT3
(yellow) and
DAT3