KidKraft MCKINLEY F24950 Installation And Operating Instructions Manual page 59

Step 29: Attach Acro and Belt Swings
A: Using 1 Threaded Clip per chain, join 1 Long Swing Chain to each side of the swing belt seat. Make sure to
close the Threaded Clip tightly using an adjustable wrench. (fig. 29.1 and 29.2).
B: Using 1 Threaded Clip per chain, join the Short Swing Chain to the Acro Bar and Acro Handle. Make sure
to close the Threaded Clip tightly using an adjustable wrench. (fig. 29.2 and 29.3)
C: Attach the other end of the swing chains to the Quick Clips attached to the swing hangers and make sure all
Quick Links are tightened. (fig. 29.1)
Fig. 29.1
Swing Seat
Warning!
for bolts protruding beyond t-nuts. Use
extra washers to eliminate this condition.
Bolt must not exceed 1/2 thread
past the nut
Short
Swing
Chain
Long Swing Chain
Check entire play centre
Swing Seat
Threaded Clip
59
Fig. 29.2
Threaded Clips attach
adjustable wrench
to seat and Acro bar.
Chain Link
Acro Bar
Acro Handles
Other Parts
1 x Acro Bar
2 x Acro Handle
2 x Swing Belt Seat
2 x Short Swing Chain
4 x Long Swing Chain
6 x Threaded Clips
Tighten Clip using
Fig. 29.3