KidKraft MCKINLEY F24950 Installation And Operating Instructions Manual page 17

Step 2: Frame Assembly
Part 2
B: Place (2622) End Panel Assembly between both (2618) Front Back Panels noticing the panel orientations.
The tops and bottoms of the panels should be flush. Make sure the panels are square then using the pilot
holes as a guide pre-drill with a 3/16" drill bit and fasten the back (2618) Front Back Panel to (2622) End Panel
Assembly and (2622) End Panel Assembly to the front (2618) Front Back Panel with 4 (WL5) 1/4 x 2-1/2" Wafer
Lags per side. (fig. 2.4)
Fig. 2.4
WL5
Notice back (2618)
Front Back Panel
overlaps (2622) End
Panel Assembly
2622
Side Wall
Wood Parts
1 x End Panel Assembly 1-1/4 x 42 x 87"
2622
Back
2618
WL5
Hardware
8 x 1/4 x 2-1/2" Wafer Lag
WL5
17
Swing Side
Front
Notice (2622) End
Panel Assembly
overlaps front (2618)
Front Back Panel